Power Caster: “It’s Easy To Maneuver”

 Power Caster 

Since 1967, we’ve prided ourselves on manufacturing a product our
customers can rely on.  Each Power Caster is hand assembled in the U.S.A.
to ensure consistent quality and performance.

It’s Easy to Maneuver
With Power Caster you can move your single- or tandem-axle trailer and
park it in just a few minutes with very little effort.  Sharp turns, tight corners
and narrow driveways–which are often difficult or impossible using your car
or truck–are no longer a headache.  A 23-foot tandem trailer can be turned
completely around in a 28-foot wide space with a flip of a switch.

Power Caster, Inc
1967
Power Caster, Inc
It’s Safe
Power Caster has been designed and manufactured to meet maximum safety standards.  In addition to a chain
guard, each unit is also grounded.  Our tongue weight and load limits are conservative (with the exception of the
PC-1), allowing plenty of margin for safety.
It’s Powerful and Compact
Each motor delivers 400-800 in./lbs. of torque at the motor shaft.  This is further geared down by a six-to-one ratio
between the motor and wheel.  The result is tremendous power being delivered to the wheel.  Depending on the
model you choose–PC-1, PC-2 or PC-3–Power Caster can handle a tongue load of 500, 800 or 1,800 pounds–all
at a size small enough to fit in the trunk of a car.
It Delivers Maximum Traction
Power Caster connects to the trailer by use of the crank-up jack (NOT THE BALL) or one of our adapters.  This in
effect shortens the trailer tongue and loads it more heavily for better traction.  All models operate best on
comparatively level hard-surfaced ground or pavement.  Inclines of no more than 10% are recommended.  Traction
and trailer weight control areas that can be traversed.  If you provide traction, Power Caster will even move
trailers over grass or soil.
It Can Be Customized
The customization doesn’t stop once you choose the model that best fits your tongue load capacity needs.  Easy
to install bolt-on adapters are available so Power Caster can be used with almost any kind of trailer.  All models
come with a 2-1/4″ socket and bushings that cover crank-up jack diameters of 1-5/8″, 1-3/4″, 1-7/8″ and 2″.  And,
while only the PC-3 comes with the kit that allows you to tap into electric trailer brakes, accessory brake switch
kits are available for the PC-1 and PC-2.
It’s Guaranteed
We’re so sure you’ll be satisfied with the performance of Power Caster that each model comes with a money-back
guarantee.  Simply return your Power Caster within 60 days of purchase, in its original condition (we have to
deduct for paint scratches), and we will refund the purchase price 100 percent (less shipping and handling costs,
both ways).  We also offer a two-year warranty that covers replacement of any defective parts.*
Power Caster, Inc.
5001 Encinita Avenue
Temple City, CA  91780
626-287-6117
800-773-3833
Fax  626-285-7735
contact@powercaster.com